LogTag Recorders LogTag Analyzer Temperature Recorder Manuel d'utilisateur télécharger pdf (Page 23)

Chapter 3 Quick Start Guide 21

Using the LogTag with the

Interface

The LogTag fits into the Interface Cradle just like a putting a piece of bread into a toaster.

As shown in the following picture, the LogTag faces towards the front label of the

Interface Cradle with the contacts on the reverse side. If you look into the Interface

Cradle slot, you will be able to see where the contacts connect with the matching contacts

in the Interface Cradle.

When placing the LogTag into the Interface Cradle slot, you should be able to feel a very

slight resistance as the contacts "grab" the LogTag. This is normal. Removal of the

LogTag will cause a slight clicking noise as the contacts snap back into their "unloaded

position".

If the LogTag has readings stored within its memory, the software will automatically start

to download the data and will also display an animated picture during the download

process, similar to the following picture.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 139 140

Pas de commentaire

LogTag Recorders LogTag Analyzer Temperature Recorder Manuel d'utilisateur Page 23